Hampton Direct H25-LP1 Propane Residential And Manufactured Homes / Mobile Homes

INSTALLATION

RESIDENTIAL AND MANUFACTURED HOMES / MOBILE HOMES

MINIMUM HORIZONTAL TERMINATION INSTALLATIONS

Planning Your venting Installation

See the "Exterior Vent Terminatal Locations" sectionforrequirements.TheH25isapproved for a minimum horizontal termination with the FPI Riser Vent Kit. See the diagram for minimum and maximum pipe lengths.

You will require the following components with your new Hampton® Rear Vent Direct Vent Free- standing Gas Stove. Please review your product to make sure you have everything you need. In the event that you are missing any part, contact your dealer. Decorative brass

or chrome trim kits are available from Simpson Dura-Vent for their wall thimbles, as well as a square wall thimble cover.

When planning your installation, it will be nec- essary to select the proper length of vent pipe for your particular requirements. Determine the minimum clearance to combustibles from the rear of the unit to the wall. It is also important to note the wall thickness. Before cutting the vent hole through the wall ensure that ALL vent and termination clearances (see the "Exterior Vent Terminal locations" section) will be met.

*Ifthisisanoutsidecorner,theminimumdistance between the vent and the outside corner is 6" (15cm). See "F" on the diagram in the "Exterior Vent Terminal Locations" section.

Note:

Horizontal

Terminal

Part# 640-530/P

Vinyl Siding

Standoff (Optional)

Part #946-205

			Wall Thimble
	Decorative		(required for
		combustible walls)
Adapter	Wall Trim
			Part # 946-202
Part #946-219/P	Part #640-545/P
(required)
	Pipe Length (max. 18")
	Part (6-5/8" Dia)
	(4" Dia.)

These are the minimum pieces re- quired. Other parts may be required for your particular installation.

NOTE: Ensure compliance with the outside vent terminal location before cutting hole as both dimensions must be met.

Minimum components for a Horizontal Installation:

640-944 Horizontal Termination Kit which includes:

1		6-5/8" Dia. x 18" Black Pipe
1		4" Dia. x 18" Aluminum Vent
1	946-202	Wall Penetration Heat Shield (Wall Thimble) (2 pcs)
1	640-530/P	Riser Vent Terminal
1	640-545/P	Decorative Wall Trim (Black)
1	948-128	Tube Mill-Pac
946-219/P 1	Adapter	Screws
Optional Components:
946-204	45o Elbow - 6-5/8" Black pipe
	and 4" Aluminum Vent
946-205	Vinyl Siding Shield for Riser Vent
	Terminal
946-208/P	Vent Guard
940	Square Wall Thimble Cover*

981Snorkel Termination (36")*

982Snorkel Termination (14")*

942Wall Penetration Heat Shield*

* Simpson Dura-Vent components

Hampton® H25-1 Direct Vent Freestanding Gas Stove 21