Installation and Connections
Figure 1:
SCART → Cinch
Figure 2:
SCART ↔ Cinch
Figure 3:
Cinch → SCART
Black
Yellow
Red
Black
Red
Blue1
Yellow
Green1
White
Black
Yellow
Red
Important Note for the Use of
When video sources are connected to the TV directly with a SCART cable, specific control sig- nals apart from Audio/Video signals will be fed to the TV. These specific signals are: With all video sources, the signal for automatic input selection that switches the TV automatically to the appropriate input as soon as the video source is started. And with DVD players, the sig- nals automatically turning the TV to 4:3/16:9 format (with 16:9 TVs or with 4:3 TVs with selectable 16:9 format) and turning the RGB video decoder of the TV on or off, depending on the DVD player´s setting. With any adapter cable, these control signals will be lost and the appro- priate setting of the TV must be made manually.
Note for RGB signal with SCART:
If you use a unit providing RGB signals on a SCART output (as e.g. most DVD players do) and
Figure 4:
for playback;
signal flow:
SCART → Cinch
Figure 5:
for record and playback;
signal flow:
SCART ↔ Cinch
Figure 6:
for playback;
signal flow:
Cinch → SCART
Red
Black
Black
Red
Blue1
Yellow
Red
Black
1Also other colours possible, e.g. brown and grey.
you want to use that RGB signal, this SCART output must be connected directly to your TV. Although the AVR can switch
RGB signals can be pathed through the AVR only when no separate sync signal is needed (see last ”Video Connection Note” on page 16).
INSTALLATION AND CONNECTIONS 17
