Hauppauge WinTV-USB FM manual Double click the speaker icon in Systray

WinTV-USBInstallation and Reference Manual

The VolumeControl application is started by clicking either:

Start/Programs/Accessories/Multimedia/VolumeControl

or

Start/Programs/Accessories/Entertainment/VolumeControl

or

Double click the speaker icon in Systray

You should see Line-Inbalance as one of the selections. If not, then click on Options/Properties and under Show the following volume controls check Line-In. Then click OK.

You should now see a selection for Line-In. Make sure the Select box is checked, then raise the volume to about 1/2 of the way to the top. This should be a good starting point for the volume control.

If LineIn is muted or not selected, unmute or select it to hear audio from the WinTV USB.

In the WinTV application under the Configure/Audio menu, the Mixer ID should be set at Line-In.

As you adjust the audio volume in the application, you should see the slide bar in the Volume Control window rise and fall.

1-6