2 Getting Started

A. Design and Installation Considerations

Hearth & Home Technologies direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required.

CAUTION

Check building codes prior to installation.

Installation MUST comply with local, regional, state and national codes and regulations.

Consult local building, fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.

When planning an appliance installation, it’s necessary to determine the following information before installing:

Where the appliance is to be installed.

The vent system configuration to be used.

Gas supply piping.

Electrical wiring.

Framing and finishing details.

Whether optional accessories—devices such as a fan, wall switch, or remote control—are desired.

C. Inspect Appliance and Components

WARNING

Inspect appliance and components for damage. Damaged parts may impair safe operation.

• Do NOT install damaged components.

Do NOT install incomplete components.

Do NOT install substitute components. Report damaged parts to dealer.

Carefully remove the appliance and components from the packaging.

The vent system components and trim doors are shipped in separate packages.

The gas logs may be packaged separately and must be field installed.

Report to your dealer any parts damaged in shipment, particularly the condition of the glass.

Read all of the instructions before starting the in- stallation. Follow these instructions carefully dur- ing the installation to ensure maximum safety and benefit.

 

WARNING

WARNING

 

Hearth & Home Technologies disclaims any

Keep appliance dry.

responsibility for, and the warranty will be voided

• Mold or rust may cause odors.

by, the following actions:

• Water may damage controls.

• Installation and use of any damaged appliance or vent

 

 

 

 

system component.

B. Tools and Supplies Needed

• Modification of the appliance or vent system.

• Installation other than as instructed by Hearth & Home

Before beginning the installation be sure that the following

Technologies.

tools and building supplies are available.

• Improper positioning of the gas logs or the glass door.

Reciprocating saw

Framing material

• Installation and/or use of any component part not

 

 

Pliers

Hi temp caulking material

approved by Hearth & Home Technologies.

Hammer

Gloves

Any such action may cause a fire hazard.

Phillips screwdriver

Framing square

 

Flat blade screwdriver

Electric drill and bits (1/4 in.)

 

Plumb line

Safety glasses

 

Level

1/2 - 3/4 inch length, #6 or #8 Self-drilling screws

Manometer

Voltmeter

 

Tape measure

Noncorrosive leak check solution

 

One 1/4 inch female connection (for optional fan).

6

Hearth & Home Technologies • BE-36-C, BE-36-CIPI397-981 Rev. V 1/07

Page 6
Image 6
Hearth and Home Technologies BE-36-C Getting Started, Design and Installation Considerations, Tools and Supplies Needed

BE-36-C specifications

Hearth and Home Technologies, a leader in innovative heating solutions, offers two remarkable gas fireplaces: the BE-36-CIPI and BE-36-C. Both models are designed to deliver efficient heating, aesthetic charm, and user-friendly features, making them ideal for modern living spaces.

The BE-36-CIPI is a direct vent fireplace that provides the warmth of a traditional fire without the hassle of wood. One of its most notable features is its contemporary design, featuring clean lines and a wide viewing area. This model comes with an impressive heat output, ensuring that spaces remain comfortably warm during chilly seasons. The BE-36-CIPI incorporates innovative technologies like the IntelliFire™ ignition system, which promotes energy efficiency by providing reliable performance while minimizing fuel consumption.

Moreover, the fireplace's advanced burner system creates a stunning flame pattern and realistic look, enhancing the ambiance of any room. With customizable options, homeowners can choose different media types, such as ceramic logs or contemporary stones, allowing for personal expression in their décor.

On the other hand, the BE-36-C model offers similar features but with its unique twist. This model is characterized by its traditional aesthetic appeal, making it an excellent choice for those who prefer a classic look with modern convenience. The BE-36-C also utilizes the IntelliFire™ system, ensuring efficiency and ease of use. With a versatile design, this fireplace can fit into various style preferences, from rustic to modern.

Both models come equipped with optional heat management systems, allowing for effective temperature regulation. This feature is particularly useful for maintaining a comfortable environment without overheating the space. The fireplaces are also designed with safety in mind, adhering to strict safety standards and offering numerous safety features like a safety pilot and tempered glass doors.

In conclusion, Hearth and Home Technologies’ BE-36-CIPI and BE-36-C gas fireplaces present an ideal blend of aesthetics, efficiency, and advanced technology. Whether opting for the contemporary style of the BE-36-CIPI or the classic allure of the BE-36-C, homeowners are guaranteed to enjoy a superior heating experience that complements their home’s design while providing warmth and comfort.