D.Installing Roof Flashing and Vertical Termination Cap

To install roof flashing see Figure 8.16.

For installation of vertical termination cap see minimum vent heights for various pitched roofs (see Figure 8.16) .

 

 

 

 

HORIZONTAL

 

 

 

 

OVERHANG

 

2 FT.

 

20 INCHES MIN.

VERTICAL

 

MIN.

 

 

 

 

 

WALL

 

 

 

LOWEST

 

 

 

 

 

 

 

DISCHARGE

 

 

 

 

OPENING

 

 

GAS DIRECT VENT

 

 

 

TERMINATION CAP

 

 

 

 

 

12

X

 

 

 

 

 

 

 

 

ROOF PITCH

 

 

 

 

IS X/ 12

 

 

 

H (MIN.) - MINIMUM HEIGHT FROM ROOF

 

 

 

TO LOWEST DISCHARGE OPENING

 

 

Roof Pitch

H (Min.) Ft.

 

 

Flat to 6/12.......................................1.0*

 

 

Over 6/12 to 7/12...........................1.25*

 

 

Over 7/12 to 8/12.............................1.5*

 

 

Over 8/12 to 9/12.............................2.0*

 

 

Over 9/12 to 10/12............................ 2.5

 

 

Over 10/12 to 11/12 ........................ 3.25

 

 

Over 11/12 to 12/12 .......................... 4.0

 

 

Over 12/12 to 14/12.......................... 5.0

 

 

Over 14/12 to 16/12.......................... 6.0

 

 

Over 16/12 to 18/12.......................... 7.0

 

 

Over 18/12 to 20/12.......................... 7.5

 

 

Over 20/12 to 21/12.......................... 8.0

 

 

* 3 foot minimum in snow regions

Î

Figure 8.16

Minimum Height from Roof to

 

 

 

Lowest Discharge Opening

 

WARNING

Fire Risk.

Explosion Risk.

Inspect external vent cap regularly.

•Ensure no debris blocks cap.

•Combustible materials blocking cap may ignite.

•Restricted air flow affects burner operation.

Caulk the gap between the roof flashing and the outsideÎ diameter of the pipe. Also caulk the perimeter of flashing that contacts roof surface as shown in Figure 8.18.

To attach the vertical termination cap, slide the inner col- lar of the cap into the inner flue of the pipe section and place the outer collar of the cap over the outer flue of the pipe section.

Secure with three screws into the outer flue. Secure the cap by driving the three self-tapping screws (supplied) through the pilot holes in the outer collar of the cap into the outer flue of the pipe (see Figure 8.17).

TERMINATION CAP

(1 of 3)

STORM

COLLAR

SCREWS

CAULK

Figure 8.17

CAULK

Figure 8.18

Î

Hearth & Home Technologies • BE-36-C, BE-36-CIPI • 397-981 Rev. V 1/07

33

Page 32 Page 34
Page 33
Image 33
Hearth and Home Technologies BE-36-C manual Installing Roof Flashing and Vertical Termination Cap
Page 32 Page 34

BE-36-C specifications

Hearth and Home Technologies, a leader in innovative heating solutions, offers two remarkable gas fireplaces: the BE-36-CIPI and BE-36-C. Both models are designed to deliver efficient heating, aesthetic charm, and user-friendly features, making them ideal for modern living spaces.

The BE-36-CIPI is a direct vent fireplace that provides the warmth of a traditional fire without the hassle of wood. One of its most notable features is its contemporary design, featuring clean lines and a wide viewing area. This model comes with an impressive heat output, ensuring that spaces remain comfortably warm during chilly seasons. The BE-36-CIPI incorporates innovative technologies like the IntelliFire™ ignition system, which promotes energy efficiency by providing reliable performance while minimizing fuel consumption.

Moreover, the fireplace's advanced burner system creates a stunning flame pattern and realistic look, enhancing the ambiance of any room. With customizable options, homeowners can choose different media types, such as ceramic logs or contemporary stones, allowing for personal expression in their décor.

On the other hand, the BE-36-C model offers similar features but with its unique twist. This model is characterized by its traditional aesthetic appeal, making it an excellent choice for those who prefer a classic look with modern convenience. The BE-36-C also utilizes the IntelliFire™ system, ensuring efficiency and ease of use. With a versatile design, this fireplace can fit into various style preferences, from rustic to modern.

Both models come equipped with optional heat management systems, allowing for effective temperature regulation. This feature is particularly useful for maintaining a comfortable environment without overheating the space. The fireplaces are also designed with safety in mind, adhering to strict safety standards and offering numerous safety features like a safety pilot and tempered glass doors.

In conclusion, Hearth and Home Technologies’ BE-36-CIPI and BE-36-C gas fireplaces present an ideal blend of aesthetics, efficiency, and advanced technology. Whether opting for the contemporary style of the BE-36-CIPI or the classic allure of the BE-36-C, homeowners are guaranteed to enjoy a superior heating experience that complements their home’s design while providing warmth and comfort.
Top Page Image Contents