Hearth and Home Technologies COLBAY-FS-B Appliance Setup, Remove Shipping Materials, Accessories

8 Appliance Setup

A. Remove Shipping Materials

Remove shipping materials from inside or underneath the firebox.

B. Accessories

Install approved accessories per instructions included with accessories. Refer to Section 12 for appropriate accesso- ries.

WARNING

Shock or fire risk.

Use ONLY optional accessories approved for this appliance.

•Using non-listed accessories voids warranty.

• Using non-listed accessories may result in a safety hazard.

•Only Hearth & Home Technologies approved accessories may be used safely.

Figure 8.2 Set the replacement gold crown in place, reinsert screws and tighten.

IMPORTANT! PREVENT PERMANENT STAINING!

Use a soft cloth and a window cleaning solution to clean all fingerprint oils from the gold or nickel surface of crown PRIOR to lighting the appliance.

D. Brick Installation

C. Door Crown Installation

TOOLS REQUIRED: Phillips head screwdriver.

REMOVAL OF METAL REFRACTORY BRICK

2 Screws 2 Screws

Figure 8.1 Remove the door from the appliance. Remove the existing black crown by removing the four screws on the back side of the face, and pull the crown off the door.

Figure 8.3 To remove existing metal refractory remove the two screws located on the left and the two on the right sides behind the side curtains.

Page 28 Quadra-Fire • Columbia Bay • 250-5195 Rev. K 10/08