15-3/4 400 mm | Hearth and Home Technologies EXCLAIM-36 instruction

15-3/4 in.

(400 mm)

TR11/TR444 - Round Termination Cap

32-3/8 in.

(822 mm)

34-3/8 in.

(873 mm)

TR11T/TR442 - Round Telescoping Termination Cap

14-3/4 in.

(375 mm)

	23 in.	23 in.
	(584 mm)	23 in.
	(584 mm)	(584 mm)
		(584 mm)
	ST1175/ST475 - Square Termination Cap
	20 in.
	(508 mm)
	17 in.
	(432 mm)	9-3/8 in.
		9-3/8 in.
		(238 mm)

9-1/4 in.

(235 mm)

TCT1175 - Terra Cotta Cap

TR-TVK

TR Top Vent Kit

10 3/4 in.

26 in.

CT-11A

Heat & Glo • EXCLAIM-36, EXCLAIM-42 • 4013-251 Rev C • 11/08

51

Image 51

Hearth and Home Technologies EXCLAIM-36 owner manual 15-3/4 400 mm

Contents

Wood Burning Fireplace Hot screen/mesh and glass doors will cause burnsFire Risk Listing Label Information/Location GrateNumber Table of Contents Installer GuideUser Guide CONDITIONS, Exclusions & Limitation of Liability Warranty Hearth & Home Technologies Limited Warranty Heat & Glo EXCLAIM-36, EXCLAIM-42 4013-251 Rev C 11/08 Combustible Materials Listing and Code ApprovalsAppliance Certiﬁcation Non-Combustible Materials Operating Instructions Your FireplaceHot glass will cause burns Firescreen Seasoned WoodStarting a Fire Grate Clear Space Glass DoorsVented Gas Log Sets & Gas Log Lighters Optional Components Wood Fuel Creosote Formation and Need for Removal Maintainance and ServiceChimney Inspection/Cleaning Disposal of Ashes Frequency As desired Glass CleaningCheck Firebox Refractory Inspect Grate Start Fire Problems Possible Cause Solution Troubleshooting Guide Typical Fireplace System Getting Started Design and Installation Considerations DraftNegative Pressure Frequently open doors Central heat outlets or returns Locating Fireplace & Chimney Tools and Supplies Needed Fireplace System RequirementsInspect Fireplace and Components Select Fireplace Location Framing & Clearances Clearances to Combustible Materials Clearances Frame the Fireplace Sidewalls/Surrounds Unpack the Fireplace EXCLAIM-36 only Installation of FireplaceUnpack the Fireplace EXCLAIM-42 only Things to Consider Removing Smoke Shield Position the Fireplace EXCLAIM-42 only GAS Knockout Install the Refractory EXCLAIM-42 only Level Fireplace Place Protective Metal Hearth Strips YES Install Outside Air Kit Chimney Assembly Height of Chimney Components Chimney Requirements Example Using Offsets/Returns Assemble Chimney Sections Install Chimney Air Kit Installing the Ceiling Firestop Install Ceiling Firestops 330 mm Install Attic Insulation Shield Cut out Hole in Roof Complete InstallationInstall Flashing Following steps should be skipped if using a chase Flat Roofs Chimney Termination Requirements Construct the Chase Chase Installations Install Chase Top Install Fireplace & Chimney ST1175/ST475 Square Termination Cap Install Termination Cap TCT1175 Terra Cotta Cap Open Top Shroud TR11/TR11T caps require radiation shield ShroudsRadiation Shield Field Constructed Shrouds Roofed Style Shroud radiation shield required Mailbox Style Shroud radiation shield required Finishing Hearth Extension= 1/k x inches of thickness Hearth Extension Construction Raised Hearth Extension Framing Flush Hearth Extension Framing Non-combustible Sealant Noncombustible Facing Finishing Material Combustible Mantel 19 3/4 502 mm Gas Code, Ansi Z223.1 AccessoriesGas Log/Lighter Provision Wood Burning Inserts Reference Materials Fireplace Dimensions EXCLAIM-36 EXCLAIM-42 Catalog # Chimney Components 15-1/4 387 mm 15-3/4 400 mm CT56 Chase Top LDS33/LDS46 Decorative Shroud EXCLAIM-36H, EXCLAIM-36T Service Parts EXCLAIM-42H, EXCLAIM-42T This page intentionally left blank Do not Discard this Manual