L. After Appliance is Lit
Initial
•The appliance should be run three to four hours continuously on high.
•Turn the appliance off and allow it to completely cool.
•Remove fixed glass assembly. See Section 12.I.
•Clean fixed glass assembly. See Section 3.
•Replace the fixed glass assembly and run continuously on high an additional 9 hours.
This cures the materials used to manufacture the fire- place.
NOTICE! Open windows for air circulation during ap- pliance
•Some people may be sensitive to smoke and odors.
•Smoke detectors may activate.
M. Frequently Asked Questions
ISSUE | SOLUTIONS | |
|
| |
Condensation on the glass | This is a result of gas combustion and temperature variations. As the appliance warms, this | |
condensation will disappear. | ||
| ||
Blue flames | This is a result of normal operation and the flames will begin to yellow as the appliance is al- | |
lowed to burn for 20 to 40 minutes. | ||
| ||
| When first operated, this appliance may release an odor for the first several hours. This is | |
Odor from appliance | caused by the curing of the paint and the burning off of any oils remaining from manufacturing. | |
| Odor may also be released from finishing materials and adhesives used around the appliance. | |
| This is a normal result of the curing process of the paint and logs. Glass should be cleaned | |
Film on the glass | within 3 to 4 hours of initial burning to remove deposits left by oils from the manufacturing | |
| process. A | |
| your dealer. | |
| Noise is caused by metal expanding and contracting as it heats up and cools down, similar to | |
Metallic noise | the sound produced by a furnace or heating duct. This noise does not affect the operation or | |
| longevity of the appliance. | |
Is it normal to see the pilot flame burn | In an intermittent pilot ignition system (IPI), the pilot flame should turn off when appliance is | |
turned off. Some optional control systems available with IPI models may allow pilot flame to | ||
continually? | remain lit. | |
|
12 | Heat & Glo • |
