Heat & Glo LifeStyle PIER-36TRLP-IPI, ST-36TR-IPI Appliance Setup, A. Remove Fixed Glass Assembly

14 Appliance Setup

A. Remove Fixed Glass Assembly	Place a thin layer and follow the pattern on the base pan
See Section 14G.	as shown in Figure 14.3.

B. Remove the Shipping Materials

Remove shipping materials from inside or underneath the firebox.

C. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.

D. Accessories

Install approved accessories per instructions included with accessories. Contact your dealer for a list of ap- proved accessories.

WARNING! Risk of Fire and Electric Shock! Use ONLY Hearth & Home Technologies-approved optional acces- sories with this appliance. Using non-listed accessories could result in a safety hazard and will void the warranty.

Figure 14.3 Teco-Sil Placement

Apply lava rock. The lava rock should cover the remain- ing base pan area. See Figure 14.4. Do not put lava rock on top of the glass ember rock (Teco-Sil) .

E. Lava Rock/Teco-Sil and Glowing Ember Placement

Prepare Electric Ember Bed and Lava Rock. The elec- tric ember bed must be prepared before the logs are set up. See Figure 14.1.

Figure 14.1 Teco-Sil

Start by applying the glass ember rock (Teco-Sil) to the base pan as shown in Figure 14.2.

Figure 14.4 Lava Rock Placement

Turn on the electric ember lights and paint the glass em- ber rock (Teco-Sil) to the desired darkness. See Figure 14.5.

Figure 14.5 Painting Teco-Sil

Figure 14.2 Teco-Sil Placement

64 Heat & Glo • ST-36TR-IPI, PIER-36TR-IPI • 2176-900 Rev. F • 8/11