Set Temperature Button
•Button Press: Displays Set Point
•Use UP and Down Arrows to adjust set point
•Press Set Button to store new set point
Temperature Set Point can be adjusted between the ranges of
Note: The controller will turn off the fireplace at 2° F over set point and turn it back on at 2° F below set point.
Up and Down Arrows
•Push to adjust set point temperature under automatic control.
Auxiliary Button
•Button Press: Turns on ember lights
•Button Press: Turns off ember lights
Can be operated independently of all functions.
Child Proof Mode
To Enter Child Proof Mode:
Operation Under Battery Power
A switch on the control box allows for battery power under
•In the event of a power failure, switch the battery operation switch to the “Battery ON” position.
•The fireplace can now be turned on and off with the ON/OFF rocker switch located near the gas valve.
•The wall switch functions will not operate under battery power.
•Under battery control the only available function is flame “ON” and “OFF” in the high position.
•To maximize battery life, and to restore full function capability of the wall switch, flip switch to “OFF” position after 120 VAC power is restored.
•Press the Up Arrow Button twice and Down Arrow Button once. The unit will send out three beeps and an indicator in the LCD panel will show that the child proof is on.
To Leave Child Proof Mode:
• Press the Up Arrow Button twice and Down Arrow |
Button once. The unit will send out three beeps and the |
indicator in the LCD panel showing that child proof is on |
will disappear. |
BATTERY
OPERATION
SWITCH
CONTROL
BOX
"OFF"
POSITION
"BATTERY
ON" POSITION
Note: When in Child Proof Mode, only the arrow buttons |
will have functionality. Unit can enter Child Proof when the |
fireplace is on or off. |
Cold Climate Button
•Button Press: Turns on Climate Control
•Button Press: Turns off Climate Control
This allows the pilot flame to stay lit when activated. A benefit of this is reduced condensation on the glass at
Figure 12.5 Control Box
56 | Heat & Glo • |