Heat & Glo LifeStyle SUPREME-P-I30AU B. Mantel and Wall Projections, Side View, Top View

1-1/2 in.

(38 mm)

BD

CD

SURROUND

APPLIANCE

SIDE VIEW

AD

SURROUND APPLIANCE

TOP VIEW

MINIMUM FIREPLACE SIZE (1-1/2 IN. (38 mm) Surround Depth)

	Location		SUPREME-I30AU
		Inches		Millimeters
AD	Alternate Unit Width	29-1/16		738
BD	Alternate Unit Depth	13-7/8		352
CD	Alternate Unit Height	19-1/16		484

*Note: If exhaust collar on insert and fireplace damper do not line up, add 4 in. (102 mm) to minimum fireplace height for bends in vent pipe.

Figure 5.3 Fireplace Opening - Deep Surround

B. Mantel and Wall Projections

WARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as specified. Framing or finishing material closer than the minimums listed must be construct- ed entirely of noncombustible materials (i.e., steel studs, concrete board, etc).

Clearance to combustible material under the insert is 1/4 in. (6 mm). Clearance from top of fireplace opening for combustibles extending 12 in. (305 mm) max. is 12 in (305 mm)

•Use leveling legs to raise insert minimum 1/4 in. (6 mm) above combustible material or outer wrap of factory built firebox.

Combustible facings must not extend behind the insert surround. For non-combustible material specifications refer to Section 1.E.

NON-COMBUSTIBLE FACING
12 in.
(305 mm)
MAX.
MINIMUM CLEARANCE
TO COMBUSTIBLE	12 in.
MANTEL OR	(305 mm)
PROJECTION	MIN.

Figure 5.4 Mantel Clearances or Other Combustibles Above Appliances

20 Heat & Glo • Supreme-N-I30AU, Supreme-P-I30AU • 2222-900 Rev. P • 6/12