Heat & Glo LifeStyle SUPREME-P-I30AU Log Set Assembly LOGS-I30, G. Install the Log Assembly, Slot

G. Install the Log Assembly

Log Set Assembly: LOGS-I30

Models: Supreme-I30, Supreme-I30-SP, Supreme-I30AU, Supreme-I30-C

#6 SRV2206-706	#2 SRV2206-705
#4 SRV2206-703	#5 SRV2206-704

#1 SRV2206-701 #3 SRV2206-702

LOG SUPPORTS	LOG TAB
PILOT ASSEMBLY	LOG PIN
GRATE TINES

Figure 1.

LOG

SUPPORT

1

LOG RESTS ON

GRATE TINE

Figure 2. Install Log #1

CAUTION: Logs are fragile, handle with care. Log #1 (SRV2206-701):Bend the log tab into the upright position as shown in Figure 1. Position Log #1 as shown in Figure 2. The left end of the log should rest on the log support. Mate the right end of the log with the right grate tine. Rotate log clockwise, until the right end of the log engages the right grate tine, and the left end of the log touches the log tab shown in Figure 1.

FLAT SPOTS

FOR LOG #4

2

GRATE TINE FITS IN

LOG GROOVE

MATE SLOT WITH LOG PIN

2

SLOT

Figure 3. Log #2 Figure 4. Place Log #2

Log #2 (SRV2206-705): Position Log #2 as shown in Figure 3. Mate the slot located on the bottom of Log #2 (Figure 4) with the log pin located on the surface of the burner. Rotate the right end of Log #2 clockwise, until it comes into contact with the grate tine.

48 Heat & Glo • Supreme-N-I30AU, Supreme-P-I30AU • 2222-900 Rev. P • 6/12