Heat Controller DMH18DB-1 RemoteControlOperation, 42Multi type Air Conditioner, Operation Mode

Operation

RemoteControlOperation

The Remote Controller transmits the signals to the system.

Signal transmitter

5		1
6
		3
4		10
2
	CANCEL
7		9
	OFF SET
ON		16
11	AUTO CLEAN
8	°C/°F	12
13		17
		18
14		15

Flip-up door (opened)

1START/STOP BUTTON

Operation starts when this button is pressed and stops when the button is pressed again.

2	OPERATION MODE SELECTION BUTTON
	Used to select the operation mode.	(Heat Pump)	(Cooling Only)

3	ROOM TEMPERATURE
	SETTING BUTTONS
	Used to select the room temperature.
4	INDOOR FAN SPEED SELECTOR
	Used to select fan speed in four steps
	low, medium, high and CHAOS.

5JET COOL

Used to start or stop the speed cooling/heating. (Speed cooling/heating operates super high fan speed.)

6 CHAOS SWING BUTTON

Used to stop or start louver movement and set the desired up/down airflow direction.

7ON/OFF TIMER BUTTONS

Used to set the time of starting and stopping operation.

8TIME SETTING BUTTONS Used to adjust the time.

9TIMER SET/CANCEL BUTTON

Used to set the timer when the desired time is obtained and to cancel the Timer operation.

10SLEEP MODE AUTO BUTTON

Used to set Sleep Mode Auto operation.

Operation Mode

Cooling Operation

Auto Operation

Healthy Dehumidification Operation

Heating Operation

• Cooling Model(), Heat Pump Model( )

11AIR CIRCULATION BUTTON

Used to circulate the room air without cooling or heating.

12ROOM TEMPERATURE CHECKING BUTTON Used to check the room temperature.

13PLASMA(OPTIONAL)

Used to start or stop the plasma-purification function.

14RESET BUTTON Initialize remote controller.

152nd F Button

Used prior to using modes printed in blue at the bottom of buttons.

16AUTO CLEAN

Used to set Auto Clean mode.

17˚C TO ˚F SWITCHING BUTTON

Used to switch temperature reading from Centigrade to Fahrenheit.

18HORIZONTAL AIRFLOW DIRECTION CONTROL BUTTON (NOT ON ALL MODELS)

Used to set the desired horizontal airflow direction.

42Multi type Air Conditioner