Hitachi CP-X268A user manual MIU Restart

MIU Menu

MIU Menu (continued)

Item				Description
	INFORMATION display :
	Use the ► or ENTER buttons to view network information and confirm settings.
	See [INFORMATION] in [User’s Manual] – Network Functions] for more information.
	~Note~
	• Only the first 16 characters of the projector name are displayed.
	• Only the first 32 characters of the SSID are displayed.
	• When the voltage level of battery for built in clock decreases, set time may
	become incorrect even though accurate date and time are input.
	Replace a battery through the following the instructions. (61)
	• MAC wireless will not be displayed when NETWORK MODE is WIRED
	even if wireless LAN SD card is mounted.
	• IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY displays "0.0.0.0" at
	the following condition.
INFORMATION	(1) NETWORK MODE is WIRELESS and wireless LAN SD card is not
	mounted.
	(2) DHCP is ON and projector dose not get address from DHCP server.
	0#/'			
	+2 & 4' 5			  			-/1&'		.9+4'8	.'55
	57$0'6/#5-			 	0'6914 6+10
	'(#7. )#6 9#;			 	7 $			/'/14;
	6+/	&+(('4 0%'		)/6 	&%# &
			#0& 6+/'		2''&				/
	/1&'			#&*1%	55+&
	%*					
	'0%4;26+10			9'2DKV		'6* 40'6
					/#%9+4'.'55					   

MIU RESTART

Choose the RESTART and press the button ►.

SERVICE

REMOVE ALL

REMOVE SD CARD

REMOVE USB

MIU RESTART

Then use the button ▲ to execute.

		MIU RESTART
		EXECUTE
		CANCEL
	Network will be once cut off when choose restart.
	If DHCP is selected on, IP address may be changed.
SERVICE	After selecting RESTART, Network menu may not be controlled approx. 20 seconds.
	REMOVE MEDIA
	Remove SD CARD and USB memory safely. Choose the media and press
	the button ►.	SERVICE
		REMOVE ALL
		REMOVE SD CARD
		REMOVE USB
		MIU RESTART

Then use the button ▲ to execute.

REMOVE USB

EXECUTE

CANCEL

~Note~

Make sure to execute this procedure before you remove the SD Card and

USB Memory.

56