Warranty and after-service, Specifications | Hitachi CP-X268A

Warranty And After-Service

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specifications

Specifications

NOTE • These specifications are subject to change without notice.

		Item			Specification

Product name				Liquid crystal projector
Liquid		Panel size		1.6 cm (0.63 type)
Crystal	Drive system			TFT active matrix
panel
panel		Pixels		786,432 pixels (1024 horizontal x 768 vertical)
		Pixels		786,432 pixels (1024 horizontal x 768 vertical)
Lens				Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm
Lamp				200W UHB
Speaker				1W x 1
Power Supply				AC100-120V/3.5A, AC220-240V/1.5A
Power Consumption				330W
Temperature range				5 ~ 35°C (Operating)
				306 (W) x 106 (H) x 249 (D) mm
Size				(Not including protruding parts)
				• Please refer to the following figure.
Weight (mass)				3.3 kg
				RGB input:		Video input:
				RGB IN1...	D-sub 15pin mini x1	COMPONENT VIDEO
				RGB IN2...	D-sub 15pin mini x1	(Y, CB/PB, CR/PR)		...... RCA x3
				RGB output:		S-Video		Mini DIN x1
				RGB OUT..D-sub 15pin mini x1		Video		RCA x1
Ports				Audio input:		Communication port:
Ports				AUDIO 1	Stereo mini x1	CONTROL	D-sub 9pin x1
				AUDIO 1	Stereo mini x1	CONTROL	D-sub 9pin x1
				AUDIO 2	Stereo mini x1	USB		USB(B) x1
				AUDIO 3	RCA x2	LAN (Wired)		RJ-45 x1
				Audio output:		LAN (Wireless) ....SD Card Slot x1
				AUDIO OUT Stereo mini x1		Memory Port :
						AUX I / O		USB(A) x1
Optional			Lamp	DT00751
Optional			Air filter	NJ22222
parts			Air filter	NJ22222
parts			Others	• Please consult your dealer.
			Others	• Please consult your dealer.

69

Image 69

Hitachi CP-X268A user manual Warranty and after-service, Specifications

Contents

About this manual Thank you for purchasing this projectorTrademark acknowledgment Content How to use the Slot cover lock Contents of package Projector features PreparationsFastening the lens cover Bottom side Part names Component CB/PBCR/PR Remote control Control buttonsMagnify Setting up Min Max Down Arrangement Elevator feet Adjusting the projectors elevator Using the Security Bar How to attachSecurity Bar Anti-theft chain or wire sold separately About Plug-and-Play capability Connecting your devices Connecting to a Network and USB Memory Examples of connection with a computerUSB CR/PR CB/PB AC inlet Connector Power cord Connecting power supply Inserting an SD Card and USB Memory Putting batteries Remote control Changing the signal setting for the projectors remote sensor Using the remote control Turning on the power Power on/offTurning off the power STANDBY/ON Selecting an input signal Adjusting the volumeOperating Temporarily muting the sound Adjusting the zoom and focus Searching an input signalSelecting an input signal  For a no signal Adjusting the position Using the automatic adjustment feature For an RGB signal  For a video signal or s-video signal Correcting the keystone distortions Using the magnify feature Temporarily blanking the screen Freezing the screen Operating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointer Using the menu function Multifunctional settingsMenu button Enter button Cursor buttons Reset button Easy Menu Easy Menu Easy Menu Picture Menu Adjust the level using the buttonsLight ó Dark Gamma Color Temp Picture Menu MY Memory Image Menu PhaseOver Scan Position Auto Adjust Image MenuSize Progressive Input MenuVideo NR Color Space Component Input MenuVideo Format Frame Lock Custom Resolution Setup Menu Using the buttons / switches the mode for mirror status Setup MenuVolume Audio Screen Menu Menu PositionBlank Start UP Screen MenuMyScreen MyScreen Lock Sync is OUT of Range No Input is DetectedMessage Source Name Turn on  Turn OFF Option MenuAuto Search Auto on Auto OFF Option MenuLamp Time MY Button FAN Speed ServiceGhost Filter Message Remote Freq Factory ResetUse the / button to change the Projectors remote sensor Information Inputting the Password Using Security FeaturesChanging the Password Security Description If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the Password Using the PIN Lock Function Turning the Password offRegistering the PIN Code If you have forgotten your PIN Code Turning Off the PIN Lock Function Using the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off See Live Mode in User’s Manual Network Functions for Live ModeMIU Menu Presentation Setup Dhcp Dynamic Host Configuration ProtocolMIU Menu Operation IP Address Default GatewaySubnet Mask Time Difference Mode Network ModeEncryption Speed MIU Restart Lamp Maintenance Case of replacement by yourself LampType number = DT00751 Air filter Type number = NJ22222Handle Filter cover Air filter’s knob Air filter Replacing Internal Clock battery Take the old battery outWill come up. Remove the battery Put a new battery Page There is no input signal TroubleshootingInternal temperature is rising Related messages Regarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly work Audio setting is not correct Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitable Either the focus and/or horizontal phase settings are Not properly adjustedWhisper function is working Lamp is approaching the end of its product Lifetime Specifications Warranty and after-service Specifications