Hitachi CP-X268A user manual Encryption, Speed, Network Mode

MIU Menu

MIU Menu (continued)

Item	Description
	MODE
	Select the communication connection control
	method to use between the PC and projector.
	Match to your PC’s settings.		#&*1%
		+0(4#5647%674'
	Use the ▲/▼ buttons to select the MODE to be
	used.
	ADHOC  INFRASTRUCTURE
	CH
	Select the channel when using a wireless LAN
	connection.
	(Channels 1 to 11 are available)		
	*The available channels would be various
	depending on a country. In addition, wireless
	LAN card might be required due to the standard.
	ENCRYPTION
	Select the encrypting method.	92#	-
			#'5
	Use the ▲/▼ buttons to select the encryption
		2-5 6-+2
	method to be used.		
		9'2DKV
			1((
SETUP	WPA2-PSK(AES)
	ô
	WPA-PSK(AES)  WPA-PSK(TKIP)  WEP 128bit  WEP 64bit  OFF

SPEED

Use the ▲/▼ buttons to select the transfer rate. AUTO54483624181211965.521 (Mbps)

•The AUTO mode automatically selects the optimum rate.

•Transfer rates may change due to the Network situation. Mbps : Megabits per second

NETWORK MODE

Select the Network mode. 9+49+'4.'55'&

Use the ▲/▼ buttons to select the Network mode.

WIRELESS  WIRED

~Note~

•Network mode will be initialized whenever the power is turned on with Power switch.

•The Wireless will be enabled when Wireless Network card is installed.

•The Wired will be enabled when Wireless Network card is not installed.

55