Hitachi CP-X268A user manual MIU Menu,  User’s Manual - Network Functions

MIU Menu

MIU Menu

Select [MIU] from the main menu to access the following functions.

2+%674'	.+8'/1&'
/#)'	2%.'5524'5'06#6+10
02	672
	G5*16
5%4''	5'48+%'+0(14/#6+10
/+7126+10
'#5;/'07

NOTE • The factory default setting for DHCP is “TURN OFF”. If your network has DHCP enabled , and need to set [IP ADDRESS], [SUBNET MASK] and [DEFAULT GATEWAY] automatically, please set [DHCP] to “TURN ON”.

( User’s Manual - Network Functions)

•If you are not utilizing SNTP ( User’s Manual - Network Functions), then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list.

NOTE Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause unnecessary troubles on the network.

Item	Description
	Display the screen appearing on the PC via Network.
LIVE MODE	Press the ► button or ENTER button to display the LIVE MODE
	Menu.
	See [LIVE MODE] in [User’s Manual – Network Functions] for
	more information.

	Make a presentation without a PC.
		6*7/$0#+.
		5.+&'5*19
PRESENTATION	the PC-LESS PRESENTATION Menu.	&+52.#;5+<'
		-';%10(+)
PC-LESS	The data in the memory card are displayed.
	Press the ► button or ENTER button to display	4' 64;
	See [PC-LESS PRESENTATION] in [User’s
	Manual - Network Functions] for more information.

52