Hitachi CP-X268A Using the MyScreen Password Function, Turning on the MyScreen Password Function

OPTION Menu

OPTION Menu (continued)

Item	Description
	1.3 If you have forgotten your PASSWORD
	1.3-1 Follow the procedure in 1.1-1 to display the
	ENTER PASSWORD BOX.
	1.3-2 While the ENTER PASSWORD BOX is
	on the remote control for about 3 seconds or
		
	displayed, press and hold the RESET button	
	press and hold the INPUT and ► buttons on
		Inquiring Code
	the projector for about 3 seconds.
	The 10 digit Inquiring Code will be displayed.	(PASSWORD)
	NOTE: If there is no key input for about 55 seconds
	while the Inquiring Code is displayed the menu will
	close. If necessary repeat the process from 1.3-1.
	1.3-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD
	will be sent after your user registration information is confirmed.

	2. Using the MyScreen PASSWORD Function
	The MyScreen PASSWORD function can be used to prohibit access to the
	MyScreen function and prevent the currently registered MyScreen image
	from being overwritten.
SECURITY	2.1 Turning on the MyScreen PASSWORD
	Function			674010
	2.1-1 Use the ▲/▼ buttons on the SECURITY			67401((
	menu to select MyScreen PASSWORD and	MyScreen PASSWORD
	press the ► button to display the MyScreen
			on/off menu
	PASSWORD on/off menu.
	2.2 Setting the PASSWORD
	2.2-1 Display the MyScreen on/off menu using the
	procedure in 2.1-1.
	2.2-2 Use the ▲/▼ buttons on the MyScreen
	PASSWORD on/off menu to select TURN ON.		
	The ENTER PASSWORD BOX (small) will be
		37+6		0':6
	displayed.	ENTER PASSWORD
	2.2-3 Use the ▲/▼/◄/► buttons to enter the		BOX (small)
	PASSWORD. Move the cursor to the right
	side of the ENTER PASSWORD BOX
	(small) and press the ► button to display the		
	CHECK PASSWORD BOX, enter the same
		37+6		0':6
	PASSWORD again.	CHECK PASSWORD
		BOX

47