OPTION Menu
OPTION Menu (continued)
Item |
| Description |
|
| |
| Using the buttons ▲/▼ adjusts the time to count down to | |
| automatically turn the projector off. | |
| Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) | |
| AUTO OFF | AUTO OFF |
| ENABLE | DISABLE |
| 0 | |
AUTO OFF | When the time is set to 0, the projector is not turned off automatically. | |
| When the time is set to 1 to 99, and when the passed time with no- | |
| signal or an unsuitable signal reaches at the set time, the projector | |
| lamp will be turned off. |
|
| If one of the projector's buttons or the remote control buttons is pressed | |
| or one of the commands (except get commands) is transmitted to the | |
| control port during the corresponding time, projector will not be turned off. | |
| Please refer to the section “Turning off the power” (19). | |
| The lamp time is the time counted after the last resetting. It is | |
| shown in the OPTION menu as the usage time of the lamp. | |
| Pressing the RESET button on the remote control or the button ► | |
| of the projector displays a dialog. To reset the lamp time, select the | |
LAMP TIME | RESET using the button ▲. |
|
| RESET ï CANCEL |
|
•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
•For the lamp replacement, see the section "Lamp" (57, 58).
| The filter time is the time counted after the last resetting. It is shown |
| in the OPTION menu as the usage time of the air filter. |
| Pressing the RESET button on the remote control or the button ► of the |
| projector displays a dialog. To reset the filter time, select the RESET using |
FILTER TIME | the button ▲. |
| RESET ï CANCEL |
| • Please reset the filter time only when you have cleaned or replaced |
| the air filter, for a suitable indication about the air filter. |
| • For the air filter cleaning, see the section "Air filter" (59, 60). |
| Sets the assigned function for the MY BUTTON1 and 2 buttons on |
| the included remote control. |
| • RGB1: Sets port to RGB1. |
| • RGB2: Sets port to RGB2. |
| • MIU: Sets port to MIU. |
| • COMPONENT: Sets port to COMPONENT. |
| • |
MY BUTTON | • VIDEO: Sets port to VIDEO. |
• | |
| • INFORMATION: Displays INPUT INFORMATION (45). |
| • AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE |
| correction (37). |
| • MY MEMORY: Loads MY MEMORY settings (31). |
| • PICTURE MODE: Changes the PICTURE mode (27). |
| • FILTER RESET: Displays the filter time reset confirmation dialogue (43). |
| • VOLUME+: Sets the volume up. |
| • |
| 43 |