Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon | Cases not involving a machine defect | Reference | |
page | |||
|
| ||
|
|
| |
| The brightness and/or contrast are adjusted to an |
| |
| extremely low level. | 27, 28 | |
| Adjust BRIGHTNESS and/or CONTRAST settings to a | ||
|
| ||
| higher level using the menu function. |
| |
Pictures appear | The WHISPER function is working. |
| |
dark. | Select NORMAL for the WHISPER item in the SETUP | 28, 37 | |
| menu. |
| |
| The lamp is approaching the end of its product |
| |
| lifetime. | 57, 58 | |
| Replace the lamp. |
| |
| Either the focus and/or horizontal phase settings are |
| |
| not properly adjusted. | 21, 32 | |
Pictures appear | Adjust the focus using the focus ring, and/or H PHASE | ||
| |||
blurry. | using the menu function. |
| |
| The lens is dirty or misty. | 62 | |
| Clean the lens referring to the section “Caring for the lens”. | ||
|
|
NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.
68
