Hitachi DZ-BX31A, DZMV750MA, DZMV780MA, DZGX20MA Changing Setting of Demonstration, 165, Demo Mode

Changing Setting of Demonstration

This DVD video camera/recorder is equipped with a demonstration function.

The default at purchase time is “Auto”, which will automatically start the demonstration approx. three minutes after the DVD video camera/recorder is turned on.

Use the following procedure if you wish to view the demonstration immediately or change the setting to “Off”.

English

1 Press the MENU button.
2 Choose “Initial Setup”,	I n i t i a l	Setu p
“Demo Mode”, and
	Beep
then press the A	Power Save
	Re c o r d LED
button.	Language		A u t o
	Demo Mode		O f f
3 Press the for e	Reset		S t a r t
	ENTER	RETURN	RAM
button to choose the
desired option, and then press the A
button.

Note:

•You can press the DISC NAVIGATION button to stop demonstration midway: The Disc Navigation screen will appear.

•If you choose “Auto”, the demonstration will not start if a disc is loaded with the power switch set to “O” or “N”, or a card is loaded with the power switch set to “P”.

•The demonstration function will not work when the DVD video camera/recorder is connected to PC.

•While the demonstration is being given, the recording indicator will blink.

Auto: To start demonstration approx. 3 minutes after turning the DVD video camera/recorder on.

Off: To set demonstration to off.

Start: To start demonstration immediately.

Press the MENU button again: The menu screen will disappear.

To stop the demonstration midway, press the

Cbutton.

The demo mode will end when the DVD video camera/recorder is turned off or the DISC EJECT button is pressed down.

165