Hitachi DZMV750MA Setting white balance manually, Press the Cbutton to End the setting 0 0 0

Thick paper

English

●Setting white balance manually

1 Point the DVD video camera/ recorder at a white object so that it fills

the screen. Use an object that is not transparent. If focus is not correct when the

white object fills the screen, manually focus the object, referring to “Manually Focusing Subject” (see page 75).

Note:

•	The white balance set using the “Set” option will be
	stored in memory until it is re-set.
•	Do not use a colored object when setting the white
	balance: The appropriate tint cannot be set.
•	If “Input Source: LINE, S-LINE” has been specified,
	you cannot use the “Set” mode of white balance
	(p. 97).
•	The setting on white balance “Set” may not be
	possible in a dark place. Also, the white balance
	cannot be set when the zoom bar is in the digital
	zoom range (p. 57). In such status, the “h” indicator
	will remain blinking. Set the white balance in a bright
	place with “Dig. Zoom: Off” specified.

2 Press the MENU button, choose “White Bal.”, “Set”, and then press the Abutton.

Camer a	Func t i ons	S e t u p
P r o g r am AE
Wh i t e Ba l .		Au t o
E I S		Set
D i g . Zoom		Ou t do o r
M IC . F i l t e r		I ndoor 1
		I ndoor 2
ENTER	RETURN	RAM

•	If the recording conditions have changed, re-set the
	white balance for appropriate colors.
•	The setting will be stored in memory even when the
	DVD video camera/recorder is turned off: The “h”
	indicator will blink when the DVD video camera/
	recorder is turned on next time. Re-set the white
	balance as needed.

3 Hold Apressed until the “h” indicator changes from blinking to a steady light. When the “h” indicator lights, the white balance setting will be complete.

Se t EX I T RAM

4 Press the Cbutton to

end the setting. 0 : 0 0 : 0 0

REM3 0 MIN

FINE	8	: 0 0 AM
	9 / 3 0	/ 2 0 0 6

92