English

REMOVING DISC

1 Press down the DISC EJECT button once and release it.

In a moment, the cover

 

of disc insertion block

 

will open.

DISC EJECT

If the DVD video camera/recorder is on at this time, the

“EJECT” indicator will blink on the LCD monitor or in the viewfinder.

2 Gently open the cover fully until it stops.

3 Remove the disc.

While pushing down the center portion of turntable, pick up the disc, holding its edge, to remove it.

Note:

Do not remove the battery or disconnect the AC adapter/charger during removal of the disc or until power is completely turned off: If you do, the disc cover will not open. If this happens, reattach the battery or AC adapter/charger, push down the DISC EJECT button once, and then release it.

Do not insert anything other than the 8 cm DVD-RAM, DVD-RW or DVD-R disc into the disc insertion block: Doing so could cause malfunctions.

When inserting or removing the disc, BE SURE NOT to look into the lens in laser pickup: Doing so could damage your eyesight.

Turntable

4 Gently push the section indicated “PUSH CLOSE” on the cover of disc insertion block, to close the cover.

48

Page 48
Image 48
Hitachi DZMV750MA, DZ-BX31A, DZMV780MA, DZGX20MA instruction manual Removing Disc