Hitachi DZGX20MA, DZMV750MA Trouble Messages, 171, Message Cause & Troubleshooting Reference

Trouble Messages

A message may appear while you are operating the DVD video camera/recorder. If a message appears, refer to the following table and take appropriate corrective action.

Messages are arranged in alphabetical order.

Message		Cause & Troubleshooting	Reference
			page
(1) Data error in a part	It is possible that the system cannot normally complete writing of
of image file. Repair	file when power is turned off for some reason during recording or
data now?	editing (deleting, dividing or combining scenes, or creating play
(2) Found error in image	list). Selecting “YES” will automatically repair the video file, but
file. Repair data now?	even if “NO” is selected, the same message will appear when the
(3) Data error in all	DVD video camera/recorder is turned on next time. (Do not
image file. Repair all	remove the disc while the DVD video camera/recorder is
data now?	recognizing it: Ignoring this will deactivate the file repair function.)
	Follow the instructions on screen, taking note of the following
	cautions:
	•	Repair will normally be complete in several minutes, but it may
		take longer (up to one hour).
	•	Be sure to use the AC adapter/charger to power the DVD video
		camera/recorder when repairing data: Repair is not possible
		using a battery. If a battery has been attached, turn the power	—
		switch off once, connect the AC adapter/charger, and then start
		repairing.
	•	Data may not be repaired, depending on the timing when
		power was turned off.
	•	Data may not be repaired normally if data recorded on another
		recorder is mixed in.
	•	The repaired data may be different from the original recorded
		content because of partial deletion of defective portion.
	•	Since the date/time for repair is added to the repaired data
		(only the corrected portion for partial repair), the original date/
		time information will be lost.
	•	Since all movies, and then all stills, are repaired, the order of
		recorded contents will be lost in case of message (2) (3) only.
	•	See *1 on page 177.
(1) Disc is not	DVD-RW/DVD-R disc that was not initialized for camera use was
formatted. If it formats, it	inserted.
becomes possible to
use for camera.
(2) However, when you
record from PC
connection terminal,
please do not format.			47
(3) All data will be
deleted. Select record
format. (Displayed only
when DVD-RW is used)
(4) Format the disc
now? (Displayed only
when DVD-R is used)
Battery is almost empty.	Replace with a charged battery, or use AC adapter/charger to		40, 44
Replace it.	power the DVD video camera/recorder.

English

171