Hitachi DZMV780MA Setting Up Record Functions, Switching Movie Quality Video Mode, Video Mode on

English

Setting Up Record Functions

1<>2

SWITCHING MOVIE QUALITY (VIDEO MODE)

Choose the movie quality from “XTRA”, “FINE”, “STD”.

It is recommended that you record critical subjects in the “XTRA” or “FINE” mode. (p. 29)

1 Press the MENU
button, use the f/	Re c o r d Func t i ons S e t u p
e/d/c/A	V I DEO Mode		XTRA
	1 6 : 9		F I NE
buttons to choose	I n p u t Sou r ce		STD
“VIDEO Mode” on the	OSD	Ou t pu t
	ENTER	RETURN	RAM
“Record Functions
Setup” menu screen,
and then press the Abutton.

2 Choose the desired quality mode, and then press the Abutton.

3 Press the MENU button to end the setting.

Note:

•The movie quality setting will be stored in memory even when the DVD video camera/recorder is turned off.

•The “VIDEO Mode” setting will not change even if the disc is replaced.

•When using DVD-RW (VF-mode)/DVD-R disc, you cannot switch the setting on movie quality or wide- screen mode while recording on the disc: The DVD video camera/recorder will be automatically set to the movie quality or wide-screen mode first used with the disc for recording.

•The movie quality setting is effective only during movie recording: The setting will not be displayed during recording of stills.

0 : 0 0 : 0 0 REM3 0 MIN

Movie quality		8	: 0 0 AM
	FINE	9 / 3 0	/ 2 0 0 6

Block-like noise may appear in recorded image, or the outline of subject image is distorted under the recording conditions listed below: Pan the DVD video camera/recorder as slowly as possible. (Block noise is likely to appear in the “STD” mode):

•If there is a complicated pattern in background (as in following figure on left)

•If the DVD video camera/recorder is moved excessively or quickly

•If subject is moving rapidly even when the DVD video camera/recorder is not moving

(Image when block-like noise occurs) (Image without block-like noise)

94