Hitachi DZ-BX31A, DZMV750MA, DZMV780MA, DZGX20MA instruction manual 173, Check Disc

Message		Cause & Troubleshooting	Reference	English
			page
Card full.	Delete unnecessary stills and try the card, or use another card.
			30, 113
	No more recording on this card can be done: Delete unnecessary
	stills or use another card.
Card full.	Delete unnecessary stills and try the card, or use another card.		30, 113
Cannot execute.
Card is not formatted.	Was the card formatted on PC? When using the card on this DVD		135
Format the card now?	video camera/recorder, choose “YES” and format it.
CHECK DISC	A disc unusable on this DVD video camera/recorder may have
	been inserted or the disc may be damaged.		26, 136
	Make sure that the type of disc is correct, and make sure that the
	disc is not write-protected.
Control Information	Mismatch may occur between the recorded image and scene
Error.	information.		137
	Update the control information.
	•	Use another disc.	—
	•	See *3 on page 177.
COPY PROTECTED	The video signal input to this DVD video camera/recorder may be
	copy-guarded.
	Some prerecorded video materials, such as movies, are guarded		84
	against copying.
	Copy-guarded materials cannot be recorded on this DVD video
	camera/recorder.
DISC ACCESS	The recorded scene is being stored on disc.
	Wait until the message disappears, and you can start to use the		50, 52
	DVD video camera/recorder.
	This DVD video camera/recorder is verifying whether the correct
	disc has been inserted.		169
	Wait until the message disappears, and you can start to use the
	DVD video camera/recorder.
DISC ALMOST FULL	Remaining free space on disc is less than 1 minute of video or 10		29, 113
	photos: Delete unnecessary scenes or use another disc.
Disc error has occurred.	• Disc error occurred during finalizing, and finalizing failed.
Finalizing is not		Replace the disc.	138
complete.	•	See *3 on page 177.
Disc error has occurred.	•	Has the disc been initialized on PC? Has initializing the disc on
Format the disc now?		PC been interrupted?
		Choose “YES” and initialize the disc when using it on this DVD	135
		video camera/recorder. Initializing the disc will erase all data on
		it.
	•	See *2 on page 177.
Disc error has occurred.	The disc may be dirty.
Formatting is not	Remove the disc and wipe off fingerprints, dust, etc. before
complete.	reusing it, or use another disc.		27, 135
	This message may also appear if you insert a disc for which
	formatting was interrupted midway. In this case, use another disc.
Disc error has occurred.	Disc error could have occurred during editing of scenes.
Keep disc inside &	Turn off the DVD video camera/recorder with the disc being used		44
restart.	in it, connect AC adapter/charger, and then power the DVD video
	camera/recorder again. Repair of scenes will be tried.

173