Turning DVD Video Camera/Recorder On and Off

English

While holding down the gray button at the right of power switch, set the switch according to each recording function:

Set to “OFF”:

The DVD video camera/ recorder will turn off

Set to “P”:

To record still on SD memory card

Set to “O”:

To record movie on DVD- RAM/DVD-RW/DVD-R disc

Set to “N”:

To record still on DVD-

RAM disc

Power ON status

During playback, set the power switch to “O” or “N” when using disc, or set it to “P” when using card.

Turn the switch while holding down the gray button at the right of switch.

Note:

Once you turn the DVD video camera/recorder on to let it recognize the disc, you can immediately record or play back by turning the DVD video camera/ recorder on again. However, if a long time has elapsed after the disc was inserted, it will take some time for the DVD video camera/recorder to start because it must recognize the disc again (see page 169).

It will take some time for the DVD video camera/ recorder to display the Disc Navigation screen after power is turned on.

If you turn the DVD video camera/recorder on, the ACCESS indicator will light or blink to show that the DVD video camera/recorder is recognizing the disc or card: During this time, no operation, such as recording, can be performed.

After several seconds, the ACCESS indicator will go out, and operating the DVD video camera/recorder will be possible.

If the ACCESS indicator does not go out, refer to “Check 4” on page 169.

ACCESS/PC indicator

OFF

Power switch

OFF

CARD ACCESS indicator

When the DVD video camera/recorder is turned on, the self-diagnosis function will work and a message may appear. In this case, refer to “Trouble Messages” on page 171 and take corrective action.

While the ACCESS/PC or CARD ACCESS indicator is lit or blinking, do not violently open or close the LCD monitor.

When the ACCESS/PC or CARD ACCESS indicator is lit or blinking, do not remove the battery or AC adapter/charger.

45

Page 45
Image 45
Hitachi DZ-BX31A, DZMV750MA, DZMV780MA Turning DVD Video Camera/Recorder On and Off, Set to OFF, Set to P, Set to N