PROGRAMMING

HOW TO USE

TO program a general Account Number Enter button (program this feature on a button with lights):

1Label the button Account Number Enter.

2Slide the T/P switch to P.

The voice terminal rings every 5 seconds to remind you that you are programming and that you cannot place or receive calls.

3Touch the button you want to program.

4Dial *82.

5Slide the T/P switch to the center position.

To program a button for a specific account number or System Speed Dial code assigned to an account number:

1Label the button Account Number plus the name of a client or project.

2Slide the T/P switch to P.

The voice terminal rings every 5 seconds to remind you that you are programming and that you cannot place or receive calls.

3Touch the button you want to program.

4Dial *88 plus the account number. or

Dial *95 plus the right # code number from 60 through 99 from a list that your administrator can give you. You do not need to include the # when you dial.

5Slide the T/P switch to the center position.

To use a general Account Number Enter button:

1While you have a call in progress, touch Account Number Enter.

The green light next to the button goes on.

2Dial the account number for the account to which you want to charge the call.

or

Dial a System Speed Dial code (#60 through #99) for the account number to which you want to charge the call.

3Touch Account Number Enter again.

The green light goes off.

5-6Section 5: Reference

Page 70
Image 70
AT&T 999-507-144 Programming HOW to USE, Label the button Account Number Enter, Touch Account Number Enter again