![](/images/new-backgrounds/1210769/210769237x1.webp)
ADMINISTRATION | None | |
PROGRAMMING | The Privacy feature requires a button with lights. | |
| To program a Privacy button for your voice terminal: | |
| 1 | Label the button Privacy. |
| 2 | Slide the T/P switch to P. |
|
| The voice terminal rings every 5 seconds to remind you that you are programming and that you |
|
| cannot place or receive calls. |
| 3 | Touch the button you want to program. |
| 4 | Dial *72. |
| 5 | Slide the T/P switch to the center position. |
HOW TO USE | To prevent others from joining your calls: |
1Before placing or receiving a private call, touch Privacy.
The green light next to the button goes on.
This feature remains active until you:
1Touch Privacy again.
The green light next to the button goes off.
Privacy (on Lines A and E)
DESCRIPTION | The system administrator can administer the Privacy feature for Line A and/or |
| Line E so that no one in the system can bridge onto or monitor these lines |
| while they have a call active on them. (See "Auxiliary Lines.") |
CONSIDERATIONS | This feature may be particularly useful if you have a modem, facsimile |
| machine, or other equipment connected to the line through an auxiliary |
| (AUX) jack on the control unit. |
| This Privacy must be administered and therefore is a different feature than the |
| Privacy feature that people can program for their voice terminals. |
MERLIN Plus System Features |