Do Not Disturb

DESCRIPTION

When you are busy and do not want to receive calls, you can touch the Do

 

Not Disturb button, if you have programmed one onto your voice terminal.

 

When you receive outside calls, the green light next to the line button flashes,

 

but your voice terminal does not ring.

 

Calls transferred to you return to the sender, and intercom calls get a busy

 

signal.

 

When you activate the Do Not Disturb at your voice terminal, the green light

 

goes on next to your Auto Intercom button at other people's voice terminals.

CONSIDERATIONS

ADMINISTRATION

PROGRAMMING

HOW TO USE

None

None

The Do Not Disturb feature requires a button with lights.

To program a Do Not Disturb button for your voice terminal:

1Label the button Do Not Disturb.

2Slide the T/P switch to P.

The voice terminal rings every 5 seconds to remind you that you are programming and that you cannot place or receive calls.

3Touch the button you want to program.

4Dial *71.

5Slide the T/P switch to the center position.

To prevent calls from ringing at your voice terminal:

1Touch Do Not Disturb.

The green light next to the button goes on.

This feature remains active until you:

1Touch Do Not Disturb again.

The green light next to the button goes off.

MERLIN Plus System Features

5-31

Page 95
Image 95
AT&T 999-507-144 system manual Touch Do Not Disturb again