Set Up Allowed Lists
Delete a Number from an Allowed List
Remove All Numbers from an Allowed List
NOTE: You cannot administer this feature with a
In order to assign an allowed list to a restricted voice terminal, you first have to set up the allowed list in the system's memory. To set up an allowed list, do the following:
1Enter administration mode.
The red lights go on next to Administer and Restrict.
2Dial the code for the list you want to set up.
(The codes are *01 through *08 for List 01 through 08 in the directory.)
3Dial the
4Dial the number you are adding to the list (a maximum of six digits).
The console beeps twice on the sixth digit to confirm the entry and remind you that you can't enter another digit to this list entry.
The console does not beep when you enter a number with fewer than six digits to the list.
5Touch Administer.
The console beeps twice.
6To add another number to the same list, repeat steps 2 through 5.
NOTE: You must begin each entry to List 01 by dialing *01, each entry to List 02 by dialing *02, etc.
7Repeat steps 2 to 6 to set up another list, or leave administration mode.
To delete a number from an allowed list already in the system's memory, do the following:
1Enter administration mode.
The red lights go on next to Administer and Restrict.
2Dial the code for the list.
(The codes for Lists 01 through 08 are *01 through *08.)
3Dial the "Item" number (01 through 10) of the number you want to delete.
4Touch Drop.
5Touch Administer.
6Continue to administer the system, or leave administration mode.
1Enter administration mode.
The red lights go on next to Administer and Restrict.
2Dial the code for the list you want to clear.
(The dial codes for Lists 01 through 08 are *01 through *08.)
3Touch Drop.
4Touch Administer.
The console beeps twice.
5 Continue with administration, or leave administration mode.
