ADMINISTRATION
PROGRAMMING
HOW TO USE
If the administrator decides to store a System Speed Dial code with Restriction Override, all voice terminals in the system can use the code as a type of password that allows the person to access the outside number, regardless of toll or outward call restrictions previously placed on the voice terminal. (See "System Speed Dial.")
If there are two or more voice terminals in the system that will have the same restrictions, the administrator can use the Copy feature to copy these restrictions from one voice terminal to another. (See "Copy.")
If your responsibilities do not include system administration, skip this information.
Before you begin to administer call restrictions for voice terminals in your system, refer to the Voice Terminal Configuration Forms that you have filled out.
To administer call restrictions to a voice terminal:
1Enter administration mode by sliding the T/P switch to P and touching
Administer.
2Dial the intercom number or touch the Auto Intercom button of the voice terminal you want to restrict.
3Touch Restrict until the green light beside it shows the kind of call restriction you want the voice terminal to have.
Steady green light on | = | Unrestricted (All calls permitted) |
Flashing green light = | Toll restricted (local and intercom calls only) | |
Green light off | = | Outward restricted (intercom calls only) |
4 Touch Administer.
The console beeps twice.
5Repeat steps 2 through 4 for each voice terminal you want to restrict.
6Leave administration mode by sliding the T/P switch to the center position.
None
Ask your system administrator what call restrictions, if any, he, or she has assigned to your voice terminal.
MERLIN Plus System Features
