PROGRAMMING | Buttons with lights are recommended for the Loudspeaker Page feature. | |
| To program a Loudspeaker Page button for your voice terminal: | |
| 1 | Label the button Loudspeaker Page. |
| 2 | Slide the T/P switch to P. |
|
| The voice terminal rings every 5 seconds to remind you that you are programming and that you |
|
| cannot place or receive calls. |
| 3 | Touch the button you want to program. |
| 4 | Dial *91. |
| 5 | Dial 6. |
| 6 | Slide the T/P switch to the center position. |
HOW TO USE | You can use a programmed button or a dial code to access this feature. | |
| To use a Loudspeaker Page button: | |
| 1 | Touch Loudspeaker Page. |
| 2 | When you hear a beep, lift your handset and make your announcement. |
To use this feature by dialing a code:
1Touch Intercom.
2Lift your handset.
3Dial 6.
4When you hear a beep, make your announcement.
When you hang up, the loudspeaker turns off automatically.
