PROGRAMMING
HOW TO USE
To program a Saved Number Redial button for your voice terminal:
1Label the button Saved Number.
2Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
3Touch the button you want to program.
4Dial *74 (you do not need to dial an outside number).
5Slide the T/P switch to the center position.
You can use a programmed button or a dial code to access this feature.
To save a number for redialing:
1Before you hang up your handset from a call in progress, touch Saved
Number or dial #23.
2Hang up your handset.
The MERLIN Plus system saves this number until you repeat this procedure to
save another number.
To redial this number later:
1Without lifting your handset, touch Saved Number or dial #23.
You voice terminal speaker goes on, and you hear dialing.
2When you hear the other person answer, lift your handset and begin
talking.
If the line is busy, or if no one answers:
1Touch Speaker to cancel the call.
5-62
Section 5: Reference