AT&T 999-507-144 system manual Saved Number Redial, Administration None

4Repeat steps 2 and 3 for each line button you want to program.

5When you are finished programming, slide the T/P switch to the center position.

HOW TO USE	Even if you program the lines on your voice terminal not to ring, you can tell
	if a call comes in for you because the green light next to the line button still
	flashes. To answer the call:
	1	Touch the line button next to the flashing green light.
	2	Lift your handset.

Saved Number Redial

DESCRIPTION

CONSIDERATIONS

If you have programmed a Saved Number Redial button, you can use the button to save an important number for one-touch dialing at a later time. If the number you call is busy or no one answers, or if you need to call the person back, you can save that number by touching Saved Number before you hang up. Later, when you touch Saved Number again, your voice terminal automatically redials the number you have saved.

You can program more than one Saved Number Redid button for your voice terminal, so that, if necessary, you can save several calls during the day. Be sure to write on a separate sheet of paper the identity of each caller and/or telephone number for each Saved Number button.

You may prefer to use a dial code rather than program a button in order to use the Saved Number Redial feature.

A Saved Number Redial button saves only manually dialed numbers; it does not save numbers dialed with an Outside Auto Dial button.

ADMINISTRATION None

MERLIN Plus System Features 5-61