AT&T 999-507-144 system manual Information

ADMINISTRATION	If your responsibilities do not include system administration, skip this
	information.
	Before you administer allowed lists for your system, refer to the Allowed List
	Directory that you have filled out.
	To set up an allowed list:

1 Enter administration mode by sliding the T/P switch to P and touching

Administer.

2 Dial a * and a 2-digit code (01 through 08) that corresponds to the number of the list.

For example, to add an entry to List 5, dail *05.

3 Dial the 2-digit number of the item in the allowed list (between 01 and 10).

For example, to add an entry to List 3 as the first item on the list, dial *03 01.

4 Dial the number, area code, or exchange to be added to the list (maximum six digits).

For example, to add the 201 area code and 834 exchange to List 2 as the seventh item on the list, dial *02 07 201 834.

5 Touch Administer.

The console beeps twice.

6 Leave administration mode by sliding the T/P switch to the center position.

To delete an entry from an allowed list:

1Enter administration mode by sliding the T/P switch to P and touching

Administer.

2Dial a * and a 2-digit code (01 through 08) that corresponds to the number of the list.

3Dial the 2-digit item number (01 through 10) of the entry you want to delete.

For example, to delete the eighth entry of List 1, dial *01 08.

4Touch Drop.

5Touch Administer.

The console beeps twice.

6Leave administration mode by sliding the T/P switch to the center position.

5-6Section 5: Reference