Centralized Programming
To program voice terminals from the administrator/attendant console. do the following:
1Enter administration mode.
2Touch the Auto Intercom button or dial the intercom number for the first voice terminal you want to program.
3Touch Conference.
4Program the voice terminal according to the instructions in the Training Manual or in Section 5, "Reference."
5Leave administration mode, or select another voice terminal for programming as follows:
aTouch Conference.
bTouch the Auto Intercom button or dial the intercom number for the next voice terminal.
cTouch Conference.
dProgram the voice terminal.
COPY | If you want to copy outside line assignments and programmable features from | ||
| one voice terminal ( the source ) onto the same buttons on another voice | ||
| terminal ( the target ), the boxed instructions on the next page tell you how to | ||
| do so. But first you should understand the following points about the Copy | ||
| procedure: | ||
| ● | The Copy procedure copies the following from the source | |
|
| — | Line assignments |
|
| — | Automatic line selection sequence |
|
| — | Call restrictions |
|
| — | Line ringing options |
|
| — | Personalized ring |
|
| — | Voice announcement enable/disable |
| ● | The Copy procedure also copies most other programmable features from | |
|
| the source onto the same buttons on the target, overwriting any | |
|
| features previously programmed onto those buttons on the target. | |
| ● | The Copy procedure does not copy allowed list assignments. | |
Administration Preview |
