SYMPTOM: Trouble with voice terminal lights, speaker, and ringing.

 

Possible Cause 1: Control

Unit.

 

 

 

 

 

 

 

 

 

 

Do This

If

 

Then

 

 

 

 

 

Slide the T/P switch on the

All the red and green lights

The voice terminal is

 

side of the voice terminal to

flash alternately and a tone

working properly. Go to

 

the T position and hold it

sounds continually

Possible Cause 3.

 

there.

 

 

 

 

 

 

 

Some red and green lights

The trouble is caused by

 

 

flash continually and/or a

either the voice terminal or

 

 

tone sounds at irregular

the cable connection. Go

 

 

internals

to Possible Cause 2.

 

 

 

 

 

 

None of the lights turn on

The trouble is either the

 

 

and a tone sounds

control unit,

the

voice

 

 

continually or irregularly

terminal, or

the

cable

 

 

 

connection. Go

to Possible

 

 

 

Cause 2.

 

 

 

 

 

 

 

 

The lights are dim

The trouble is a faulty

 

 

 

control unit or power

 

 

 

supply. Contact

your

 

 

 

equipment supplier for

 

 

 

assistance.

 

 

 

 

 

 

 

 

 

Possible Cause 2: Faulty voice terminal.

 

 

 

 

 

 

 

 

 

 

Do This

I f

 

Then

 

 

 

 

 

Unplug the modular voice

The same trouble appears on

The trouble is either in the

 

terminal cord from the

the working voice terminal

control unit or the cables.

 

malfunctioning voice

 

Plug

the malfunctioning

 

terminal. Plug the cord into

 

voice

terminal into its

 

a working voice terminal.

 

original jack and go to

 

Slide its T/P switch to the T

 

Possible Cause 3.

 

position and hold it there.

 

 

 

 

 

 

 

The trouble does not appear

The malfunctioning voice

 

 

on the working voice

terminal is faulty. Contact

 

 

terminal

your equipment supplier for

 

 

 

assistance.

 

 

 

 

 

 

 

 

 

Troubleshooting Procedures

7-5

Page 184
Image 184
AT&T 999-507-144 system manual Possible Cause 1 Control, Unit