AT&T 999-507-144 system manual Label the button Touch-Tone Enable, Touch Touch-Tone Enable

Touch-Tone Enable

DESCRIPTION

CONSIDERATIONS

ADMINISTRATION

PROGRAMMING

HOW TO USE

NOTE: This feature is for rotary lines only.

If you have telephone lines that carry rotary signals, use the Touch-Tone Enable feature to switch to Touch-Tone signals midway through a dialing sequence. This lets you take advantage of bank-by-phone, credit card authorization, computer access, and alternate long distance services.

None

None

To program a Touch-Tone Enable button for your voice terminal:

1Label the button Touch-Tone Enable.

2Slide the T/P switch to P.

The voice terminal rings every 5 seconds to remind you that you are programming and that you cannot place or receive calls.

3Touch the button you want to program.

4Dial *76.

5Slide the T/P switch to the center position.

To switch from rotary pulse to Touch-Tone signals as you dial a number:

1Lift your handset.

2Dial the first part of the number.

3Touch Touch-Tone Enable.

4Dial the remaining numbers

When you hang up your handset, your system returns to rotary signals.

5-30Section 5: Reference