|
| If your voice terminal does not respond when you slide the Test/Program | |
|
| switch to T, check Section 7, "Troubleshooting," for possible causes and | |
|
| recommended action. | |
|
|
|
|
| Toll Prefix | Setting |
|
|
|
| |
DESCRIPTION | In most telephone systems people must dial a toll prefix (a 1 or a 0) before | ||
|
| they dial | |
|
| system is installed, it is set for dialing a toll prefix. If people in your system | |
|
| don't need to dial a toll prefix, the system administrator must set the system | |
|
| for dialing the area code only. | |
CONSIDERATIONS | None | ||
ADMINISTRATION | If your responsibilities do not include system administration, skip this | ||
|
| information. | |
|
| To administer the system so people can dial an area code and telephone | |
|
| number without a toll prefix: | |
|
| 1 | Enter administration mode by sliding the T/P switch to P and touching |
|
|
| Administer. |
|
| 2 | Dial *37. |
3 Leave administration mode by sliding the T/P switch to the center position.
To change the system setting so that people must dial a toll prefix before an area code and a telephone number:
1Enter administration mode by sliding the T/P switch to P and touching
Administer.
2Dial *36.
3Leave administration mode by sliding the T/P switch to the center position.
