Hold Retrieve

DESCRIPTION

If you have a 5-button voice terminal and do not have a line button for a call

 

that you have received or that has been transferred to you, you can still put it

 

on hold using the Hold button. To retrieve the call, you can use a dial code

 

or program a Retieve Call button.

CONSIDERATIONS

ADMINISTRATION

PROGRAMMING

HOW TO USE

To use this feature, you can either program a button or use a dial code.

If your system administrator has set your voice terminal for Button-Free Line Operation, you should have a Hold Retrieve button on your voice terminal. (See "Button-Free Line Operation.")

None

To program a Hold Retrieve button for your voice terminal:

1Label the button Retrieve Call.

2Slide the T/P switch to P.

The voice terminal rings every 5 seconds to remind you that you are programming and that you cannot place or receive calls.

3Touch the button you want to program.

4Dial *95*.

5Slide the T/P switch to the center position.

You can use a programmed button or a dial code to access this feature. To put a call on hold:

1Touch Hold.

MERLIN Plus System Features 5-37

Page 101
Image 101
AT&T 999-507-144 system manual Hold Retrieve, Considerations Administration Programming HOW to USE