ADMINISTRATION
HOW TO USE
None
To set up your SAA:
1Unplug the appropriate voice terminal from its modular wall jack, and plug it into the jack labeled V.T. on your SAA.
2Plug one end of the modular cord into the jack labeled C.U. on the SAA and the other end into the voice terminal's modular wall jack.
3Plug the modular cord from the extra alert device into the jack labeled Alerter on the SAA.
To have the extra alert device turn on when a call rings at the appropriate voice terminal, turn the SAA to the On position.
If you want to use more than one extra alert device alternately:
1Turn the extra alert switch's knob to the appropriate On position labeled
(1)or (2). For example, if you connect a bell to position (1) and a strobe to position (2), turn the control switch to position (1) to operate the bell and to position (2) to operate the strobe.
If you want to use more than one extra alert device simultaneously:
1Turn the extra alert switch knob to the appropriate On position labeled (1) or (2). For example, if you connect a bell and a strobe to a line bridging adapter and the adapter to position (1) on the SAA, turn the control switch to this position.
Accessory Equipment |
|
