5If you want to change the order in which the system selects available lines for this telephone, assign an Automatic Line Selection sequence.

aWhile in programming mode, dial **.

bTouch the line buttons in the order you want them to be selected.

cWhen you are finished programming the basic telephone, slide the T/P switch to the center position.

6If you want the basic telephone not to ring on specified lines, use the Ringing Options feature.

a While in programming mode, touch the line for which you want to program a ringing option:

If you don't want the phone to ring, dial *35.

If you want the phone to ring immediately when a call comes in, dial *37.

bDisconnect the substitute voice terminal and connect the OPTI to the same voice terminal jack. Then connect the basic telephone to the OPTI.

HOW TO USE

A person using a basic telephone must dial the following codes to access the

 

lines the system administrator assigns to the intercom number for the

 

telephone.

 

 

 

FIGURE 5-2 Basic telephone codes for accessing lines

 

 

5-88Section 5: Reference

Page 152
Image 152
AT&T 999-507-144 system manual Telephone