PROGRAMMING
HOW TO USE
2Dial the intercom number or touch the Auto Intercom button for the
voice terminal you are administering.
A green light goes on next to the Auto Intercom button. Green lights go on next to the buttons of any lines already assigned to the voice terminal.
3Touch the line button until the green light next to it shows the line assignment you want:
Green light on = the line is assigned to the voice terminal
Green light off = the line is not assigned to the voice terminal
4To make the line
–Dial *31 if you want the voice terminal to ring.
–Dial *32 if you do not want the voice terminal to ring.
5Touch Administer.
The console beeps twice.
6Leave administration mode by sliding the T/P switch to the center position.
To reassign lines to separate buttons on a voice terminal that has
1Enter administration mode by sliding the T/P switch to P and touching Administer.
2Touch the Auto Intercom button for the voice terminal you are administering.
3Dial *34.
A green light should go on next to the lines that have been assigned to the voice terminal.
4 Touch Administer.
The console beeps twice.
5Leave administration mode by sliding the T/P switch to the center position.
None
If you do not have a line button for a call that you have received or that has been transferred to you, you can still put the call on hold using the Hold button. To retrieve the call, you can use the Hold Retrieve feature. (See "Hold Retrieve.")
