NOTE: The system adds 10 seconds to the number of minutes you enter in order to account for the time it can sometimes take to connect a call to the right person. For example, if you dial 0 in this step, the minimum length of a reported call will be 10 seconds (0 minutes, 10 seconds). If you dial 9, the minimum length-will be 9 minutes, 10 seconds. The extra 10 seconds is not added to the call's duration on the call report.
4 Touch Administer. The console beeps twice.
5 Go on to set the type of calls reported, or leave administration mode.
Dial one digit (0 through 9) for the number of minutes.
Dial *83.
1 If you haven't already done so, enter administration mode.
2
3
7 Dial *81.
8 Dial two digits for the hour (00 through 23).
9 Dial two digits for the minute (00 through 59).
10 Touch Administer. The console beeps twice.
11 Go on to assign Call Report to a control unit jack, or leave administration mode .
The system automatically assigns station jack number 19 on the control unit to the data collector and printer for the Call Report option. If you want to keep jack number 19 for the Call Report equipment, you don't have to do anything here. Go on to "Minimum Length of Reported Calls."
If you want to assign the data collector and printer to a control unit jack other than 19, do as follows:
1 If you haven't already done so, enter administration mode.
2 Dial *82.
The green light goes on next to the Auto Intercom button for the control unit station jack to which the data collector and printer are currently assigned (jack 19 unless the setting has alredy been changed).
3 Touch the Auto Intercom button for the control unit station jack you want to use to connect the data collector and printer to the system. The green light next to the Auto Intercom button you touch goes on.
The green light next to Auto Intercom button 19 goes off.
4 Go on to set the minimum length of reported calls, or leave administration mode.
The system is set to report calls lasting one minute or longer. If you want to keep one minute as the minimum length for reported calls, you don't have to do anything here. Go on to "Type of Calls Reported."
If you want a setting other than one minute, do as follows:
