If you have PBX, Centrex, or Custom Calling features, you must touch Recall any time instructions call for a switchhook flash. By touching the Recall button, you automatically place a specially timed pause onto the line. If you press the switchhook instead, you disconnect your call.
ADMINISTRATIONNone
PROGRAMMINGNone
HOW TO USE | To use Recall as a switchhook flash: |
| 1 Touch Recall. |
Ring Option Override
DESCRIPTION | Sometimes you may want all of your talk to ring immediately, even if you | |
| have programmed the lines on your voice terminal to ring after a delay or not | |
| at all. (See "Ringing Options.") For instance, you may need to cover calls for | |
| someone who shares one of your lines. You can use a Ring Option Override | |
| button to temporarily override the ringing option you have established. | |
CONSIDERATIONS | None | |
ADMINISTRATION | None | |
PROGRAMMING | A button with light is recommended but not required. | |
| To program a Ring Option Override button for your voice terminal: | |
| 1 Label the button Ring Option Override. | |
| 2 Slide the T/P switch to P. | |
|
| The voice terminal rings every 5 seconds to remind you that you are programming and that you |
|
| cannot place or receive calls. |
| 3 Touch the button you want to program. | |
| 4 | Dial *78. |
| 5 | Slide the T/P switch to the center position. |
