AT&T 999-507-144 system manual Dial *38

CONSIDERATIONS

ADMINISTRATION

PROGRAMMING

HOW TO USE

None

If your responsibilities do not include system administration, skip this information.

To set your system for rotary dialing:

1Enter administration mode by sliding the T/P switch to P and touching

Administer.

2Dial *39.

3Touch Administer.

The console beeps twice.

4Leave administration mode by sliding the T/P switch to the center position.

If you need to reset the system for Touch-Tone dialing:

1Enter administration mode by sliding the T/P switch to P and touching

Administer.

2Dial *38.

3Touch Administer.

The console beeps twice.

4Leave administration mode by sliding the T/P switch to the center position.

None

If you have telephone lines that carry rotary signals, you can switch to Touch- Tone signals midway through a dialing sequence by using the Touch-Tone Enable feature. (See "Touch-Tone Enable.")

MERLIN Plus System Features 5-79