AT&T 999-507-144 system manual Send Message, Description

Send Message

DESCRIPTION	The system attendant can turn on the Message light at the voice terminals of
	people in the MERLIN Plus system in order to alert them that they have a
	message. (See "Message.")
CONSIDERATIONS	The Message light at voice terminals in the system can only be turned on at
	the attendant/administrator voice terminal.
	If your company is using a 10-button voice terminal as the attendant console,
	the attendant can still use the Send Message feature by using the directions
	below. However, he or she will not know if the light is already on at the
	voice terminal.
	Note that 5-button voice terminals do not have a Message button. Therefore,
	the attendant will have to use another method to let these people know that
	they have a message waiting.
ADMINISTRATION	None
PROGRAMMING	None
HOW TO USE	To turn on the Message light at a voice terminal:
	1 At the administrator/attendant voice terminal, touch Send Message.
	2 Touch the Auto Intercom button for the person's voice terminal.
	The red light next to the Auto Intercom button goes on, indicating the person's Message light is
	lit.

If the attedant is using a 10-button voice terminal as the attendant console, he or she can still use the Send Message feature by dialing #01 and then either

–Touching an Auto Intercom button that the attendant has programmed for the person.

–Dialing a 3-character code corresponding to the Send Message button code on the following chart.

MERLIN Plus System Features 5-63