AT&T 999-507-144 system manual Special Characters in Dialing Sequences, Pause

To use Monitor-on-Hold:

1When you have been put on hold, touch Speaker.

2Hangup.

3When you hear the other person return to the call, lift your handset and continue the call.

To use Group Listening:

1Without hanging up, touch Speaker, and continue your conversation.

Special Characters in Dialing Sequences

DESCRIPTION

CONSIDERATIONS

ADMINISTRATION

P R O G R A M M I N G

HOW TO USE

Pause

YOU may need to program a pause, stop, or switchhook flash into an Outside Auto Did, a Personal Speed Dial, or a System Speed Dial sequence, or you may need to switch from rotary to Touch-Tone signals in the middle of a programmed dialing sequence. To do so, you must enter one or more special Characters when you program the sequence.

The switchhook flash can be used only at the beginning of a programmed dialing sequence.

None

None

Use the following procedures to enter special characters into a dialing sequence.

Program a pause (1.5 seconds) into a dialing sequence. For example, you may need a pause between a pool access code, such as a 9, and an outside telephone number in an Outside Auto Dial sequence.

1Dial the access code, such as a 9.

2Touch Hold (Pause).

3Dial the outside telephone number.

5-66Section 5: Reference