Hitachi DZGX20MA, DZMV750MA, DZ-BX31A, DZMV780MA instruction manual 183

Symptom		Cause and Correction	Reference	English
			page
The DISC EJECT	While the DVD video camera/recorder is connected to PC, use
button is not valid when	Explorer to right-click the DVD video camera/recorder drive icon
the DVD video camera/	and execute “Eject”.		—
recorder is connected to	If DVD-MovieAlbumSE is running, clicking the eject button on
PC.	DVD-MovieAlbumSE will open the cover of disc insertion block of
	this DVD video camera/recorder: Remove the disc.
When the time stamp of	The file system of this DVD video camera/recorder is operated on
file in DVD-RAM is	Greenwich Mean Time (GMT), and time lag information has not
viewed on PC, it is	been set. With Windows® as of January, 2006, the time stamp of		—
different from the actual	file viewed on Explorer looks different from the actual recording
recording time.	time. The actual recording time will appear for date/time
	indication on playback screen.
When DVD-	A disc other than DVD-RAM/DVD-RW (VR-mode) is loaded in
MovieAlbumSE is	drive: DVD-MovieAlbumSE cannot be used for media other than		—
started, “Disc in Drive X:	DVD-RAM/DVD-RW (VR-mode).
cannot be used”
	Click the “Preference” button in the dialog box, click the “Device
appears.
	Setting” tab to choose the drive where DVD-RAM/DVD-RW (VR-
			—
	mode) disc is loaded in the “Drive Select” column, and then click
	“OK”.
An image that should	Click the “Preference” button at top right of DVD-MovieAlbumSE
have been recorded	screen, click the “Device Setting” tab to choose the drive where
does not appear when	DVD-RAM/DVD-RW (VR-mode) disc is loaded in the “Drive		—
DVD-MovieAlbumSE is	Select” column, and then click “OK”.
started.
When executing	•	If stills are included in the range of “Export”, it may take more
“Export” on DVD-		time because data must be re-encoded and read.	150
MovieAlbumSE, it will	•	If “Divide by Chapter” is not chosen, it may take some time
take time to read.		because data will be read while being re-encoded.
“Hardware Removal”	Exit Windows® once, and then disconnect the DVD video
results in error.	camera/recorder. If your PC uses Windows® 2000 Professional,		—
	the problem may be solved if you install Windows® 2000 Service
	Pack 3 or later.
No USB HS (high	Make sure that you have already installed the driver provided with
speed) connection even	the USB2.0 card.		—
when USB2.0 card is	You will need to install the driver provided by USB2.0 card maker
used.	in order to operate the USB2.0 card at HS (high speed).

183